PE 101: Replacing the Spray Hose Guide
- Last updated
-
-
Save as PDF
This article explains how to replace the spray hose guide (PN 039-315) on PE 101.
|
Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury.
- Recommended Tools: Adjustable wrench
Replacing the Spray Hose Guide
|
1. Remove the Quick-Connect (PN 7369) to allow the hose to move freely. Refer to this document for instructions on how to remove the Quick-Connect.

|
2. Hold the faucet spring firmly and unscrew it from the black spray hose guide to expose the nylon hose.

|
3. Unscrew the nylon hose from the brass adaptor.

|
4. Slide off the black spray hose guide and replace with new spray hose guide.

|
Reassembling the Spray Hose
|
1. Screw the nylon hose to the brass adaptor |
2. Holding the faucet spring firmly, screw on the black spray hose guide. |
3. Reinstall the Quick-Connect (PN 7369). |
Contact Us:
Canadian Consumers: Email or Call 1-866-473-8442
U.S. Consumers: Email or Call 1-800-777-9762
|
 |