NJ201-How to Clean the Integrated Quick Connect
|
This article will explain how to clean the NJ201 integrated quick connect |
 |
Preparation: |
Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury.
- Recommended Tools: Needle nose pliers
Instruction: |
|
Remove the 390-778 retaining clip. Your model may not have a retaining clip. |
 |
Using long nose pliers, remove the black casing by pulling on it, then the spring and the check valve. Clean it and put the parts back in place, making sure to put the check valve in so that you can see the 4 openings when you look inside the hose, see photo. |
 |
|
|
