Metal Quick-Connect cleaning and removing
This article explains how to remove and clean the metal quick connector when you have low flow issue |
![]() |
Preparation: |
Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury.
- Recommended tools: Adjustable wrench
Instructions: |
1- Push upwards 2 Hold down and pull down the assembly |
|
*Clean the 2 check valves and/or flow restrictor. Follow the steps in reverse to reinstall the check valve. |
|