Skip to main content
House of Rohl Solutions

How to Replace a Riobel Kitchen Faucet Handle (Threaded Dome)

  1. Last updated
  2. Save as PDF
Preparation:

 

House of Rohl produces a variety of Side Mounted Handle Faucets. The interior components and assembly are not the same for each model. This article will explain one of the most common handle assemblies referred to as a Threaded Dome. 

clipboard_e6ef931830e9254a2d5264ba65d7b0ecf.png

Disassembly:

In some cases, accessing the hole in the handle might require loosening the faucet under the sink and rotating the body of the faucet.

  • Removed small round plug/cap (#1) covering the handle hole. (Not used in all faucets).
  • Using a 2.5mm (3/32) Hex wrench, loosen the set screw (#2) until the handle (#3) lifts off. Slide the handle (#3) off of the faucet.
Assembly:
  • Slide the handle (#3) back on and tighten the set screw (#2) to complete installation.
  • If applicable, re-install the small round plug/cap (#1).

If you loosened the mounting hardware (#4) under the sink to rotate the faucet to gain access to the set screw, rotate the faucet back to the original position and tighten the mounting hardware (#4).

For additional information on our products visit solutions.houseofrohl.com and select the type of product you are repairing. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product. 

 

Contact Us:

Canadian Consumers: Email or Call 1-866-473-8442

U.S. Consumers: Email or Call 1-800-777-9762