Skip to main content
House of Rohl Solutions

Enabling And Disabling The Sensor

The guide below will help you to disable and enable your Touchless Wave - Single Sensor Hands Free Faucet.

Faucet Sensor:

clipboard_e6943550b75edbaa17964d9adc98e62b3.png

Control Box:

clipboard_ea65adfe8cc5afe500a456bc137fc8d1d.png

Side Sensor - Wave you hand in front of the side sensor to turn the water on. Wave your hand again to turn the water off.

Lever Handle - Open and Close the lever handle to turn the water on and off.

Disable:

1. With the handle in the off position (pressed in towards the faucet), hold your hand over the sensor.

2. Rotate the handle from hot to cold three times.

3. The water will stop flowing once the sensor is disabled.

 

Enable:

1. With the handle in the off position (pressed in towards the faucet), hold your hand over the sensor.

2. Rotate the handle from hot to cold three times.

3. The water will begin flowing once the sensor is enabled.

 

Contact Us:

Canadian ConsumersEmail or Call 1-866-473-8442

U.S. Consumers: Email or Call 1-800-777-9762

  • Was this article helpful?