Skip to main content
House of Rohl Solutions

Bistro BI101-201 Changing the hose and gasket

This article explains how to replace the sprayer nylon hose on the Bistro faucet

Preparation:

Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury. 

  • Recommended tools: Adjustable wrench

Instructions:

Snag_241b7244.png

 1.  Pull the spring up to access the nuts.

Snag_24268123.png

2. Unscrew the brass nut first. Then unscrew the entire hose from the faucet and remove the hand shower and spring

Snag_241c414c.png

3.  Unscrew the brass nut completely from the end of the hose to remove the ring. You will have to reinsert the ring on the new hose with the brass nut.

Snag_241f2559.png

4. Replace the gasket in the faucet.

Snag_13c3539f.png

5. Put back the ring, the shower head, spring, and brass nut on the new hose.

 

 Snag_13c3f935.png

6. Slide the hose back into the faucet, using an adjustable wrench, screw the chrome part, then tighten the brass nut.

 

Contact Us:

Canadian ConsumersEmail or Call 1-866-473-8442

U.S. Consumers: Email or Call 1-800-777-9762

  • Was this article helpful?