ROT8 and CIS8 Instructions for Re-Attaching
How to Re-Attach the Holder for the ROT8/CIS8 |
|
Tools needed: 2.5MM Allen Key, 1.5mm Allen Key or 1/8” flat head screwdriver and a Phillips Screwdriver
1) Detach Toilet Paper holder from wall using 1.5MM Allen key, or 1/8” flat head, by inserting in set screw at base of escutcheon and rotating set screw counterclockwise until loose. |
 |
 |
 |
|
2) To detach C-shaped Toilet Paper holder bar from housing or escutcheon, insert Phillips screwdriver into Phillips screw head in back of escutcheon and rotate counterclockwise until loose as shown above. |
 |
 |
3) Insert the 2.5M Allen key into the hole on the ball joint and loosen the set screw inside by rotating counterclockwise. Replace the C-shaped holder by inserting into the slot, and then tighten down the set screw by rotating clockwise with a 2.5MM Allen key to hold it in place.
 |
 |
4) Re-attach the housing to the holder by inserting the Phillips screw and rotating clockwise with the Phillips screwdriver. Re-attach Toilet Paper holder to wall with the 1.5MM Allen key or 1/8” flat head by inserting screw into the base of the escutcheon and rotating set screw clockwise until tight.
 |