R2012D and R2014D Cartridge Replacement
Subject: Servicing the CartridgeShut water supply to the faucet off: Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury. |
|
1. Mark the Nut Before Removing On re-installation, return the nut position to this point |
 |
|
2. Remove the cartridge Inspect the split sealing washer for damage |
 |
|
3. Remove the spacer below the cartridge Inspect the split ring for damage |
 |
 |
| 4. Inspect the body for any damage to the brass surface where the split ring sits |
 |
| 5. Reassemble and test |
 |
Replacing the Cartridge in Rough Valves R2012D and R2014D