Skip to main content
House of Rohl Solutions

Replacing a diverter rod and-or the 302-502 rod gasket

  1. Last updated
  2. Save as PDF
​
This article will explain how to replace a diverter rod and gasket for a deck mount tub filler
​

clipboard_ea5d17e9127b3bfbdbffe29ac6cf59619.png

 clipboard_e3978a7a232944d3d76d15331d93ec978.png
Preparation:
  • Recommended tools: 2.5mm allen key. The tool to unscrew the rod and the nut containing the 302-502 gasket will be supplied with the replacement parts.

  • Shut water supply to the faucet off: Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury. 

Instructions: 302-502 gasket

Snag_22e1722b.png

Disassemble in the order shown

clipboard_e006bef7ce6cc485403348dedd7cd23a9.png

 

clipboard_e2ec0bd437df6958c090c184dad48360a.png

Remove the nut from the spout

clipboard_e70a7e7fef078ab6c43b81bb56afd8190.png

Remove the gasket

Closed section facing upwards

Follow the steps in reverse to reinstall the gasket
Instructions: Rod

Snag_22e96738.png

Disassemble in the order shown

clipboard_eb46a4e8c834ae825ffe280f925608e41.png

 

clipboard_e1bcc4b6bf152cb533c555ed68e7f0e1e.png

Remove the diverter rod. Follow the steps in reverse to reinstall the diverter rod.
 

Contact Us:

Canadian Consumers: Email or Call 1-866-473-8442

U.S. Consumers: Email or Call 1-800-777-9762