Gasket installation on hand shower hose 7050
|
This article explains how to install the hose gasket on the 7050 shower hose (GUIREP-7050 Rev00 2015-03) |
09 |
4342 |
4440 |
Preparation: |
Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury.
- Recommended tools: Adjustable wrench, adhesive tape
If you have difficulty reinstalling in the shower head holder, you may need to apply vegetable oil on the gasket to lubricate.
Instructions: |
|
|
Disassemble in the order shown. |
A- Fix |
|
Follow the steps in reverse order to reassemble the Hand Shower. |
|
|
