Skip to main content
House of Rohl Solutions

401-116 and 401-199 Balancing Spool Cleaning

This article will provide steps on how to disassemble and clean the balancing spool on the 401-116 and 401-199 cartridges.
Preparation:

Recommended Tools: Flat head screwdriver. The following instructions assume the handle and associated handle pieces have been removed. For additional details on your shower valve contact us

Shut water supply to the faucet off: Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury. 

Instructions:

Snag_193902b0.png

clipboard_e78ed1a3027dde84929e81a12cfef7307.png

Snag_193998b6.png

Snag_1939cbad.png

Remove and clean the balancer (yellow arrow)

 

Contact Us:

Canadian ConsumersEmail or Call 1-866-473-8442

U.S. Consumers: Email or Call 1-800-777-9762