9.51570 or 9.51475 O-Ring Replacement Instructions

Parts needed: 9.51570 or 9.51475

Tools Required: 

Smooth jawed crescent wrench, protective tape or cloth, small standard screw driver

Preparation:

Shut water supply to the faucet off: Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury. 

1. Remove the aerator ring and aerator.                                                  

2. Remove the finial cap. Note: protect the finish with tape or a cloth

3. Remove the spout                                                                                          

4. Change the o-ring.

5. Reverse steps to complete repair.