Skip to main content
House of Rohl Solutions

LS57 Supply Line Installation Instructions

 

Installation of the Flexible Tubes for Single Lever Mixers

clipboard_e02226541a53010851edaf9466018fce6.png clipboard_e2f7c75b4f2277375129b6d267aafc984.png

Follow these instructions for the correct way to install the supply tubes for hot and cold water:

  • Screw the tubes onto the body using 11 mm. key (for copper tubes use a 13 mm. key), which should be positioned on the specific millings, avoiding closing them too tight (drawing A)
  • Screw the nuts G.3/8" to the connections of the hydraulic plant, using a 19 mm. key.

IMPORTANT:  Do not use hexagonal keys or regulable pincers on the flexible nuts, which may compromise the durability of the flexible hoses (see drawing B)

 

Contact Us:

Canadian ConsumersEmail or Call 1-866-473-8442

U.S. Consumers: Email or Call 1-800-777-9762

Snag_49f71ca.png

 

  • Was this article helpful?