How to replace the slider on the 4854 bar
|
This article explains how to remove the 4854 bar end to replace the slider (GUIREP-4913-Rev00) |
 |
Preparation: |
- Shut water supply to the faucet off: Important: Turn off the water supply at the faucet before starting. You can either turn off the main supply to the house or close the shut-off valves if the faucet is equipped with them. Then open the faucet again to empty it of residual water. Failure to do so could result in flooding or injury. \
- Purge the water supply system before connection to the faucet.
- Recommended tools: Phillips screwdriver, screw, pliers
Instructions: |
 |
 |
 |
 |
 |
Repeat the steps in reverse to reassemble the Hand Shower Rail. |
|
|
